Search results for "Aluminium oxide"
showing 10 items of 57 documents
Surface structure promoted high-yield growth and magnetotransport properties of Bi2Se3 nanoribbons
2019
AbstractIn the present work, a catalyst-free physical vapour deposition method is used to synthesize high yield of Bi2Se3 nanoribbons. By replacing standard glass or quartz substrates with aluminium covered with ultrathin porous anodized aluminium oxide (AAO), the number of synthesized nanoribbons per unit area can be increased by 20–100 times. The mechanisms of formation and yield of the nanoribbons synthesized on AAO substrates having different arrangement and size of pores are analysed and discussed. It is shown that the yield and average length of the nanoribbons can base tuned by adjustment of the synthesis parameters. Analysis of magnetotransport measurements for the individual Bi2Se3…
On the mechanism of the interaction between oxygen and close-packed single-crystal aluminum surfaces
2003
Abstract Using periodic first principles simulations we investigate the interaction of oxygen molecules with both regular Al(111) and Al(001) surfaces as well as a stepped Al(111) substrate. The limitation of this approach is the use of thin metallic slabs with a limited range for their coverage by adsorbed oxygen. The advantage is the detailed modeling that is possible at an atomic level. On the regular Al(111) surface, we have been able to follow the oxidation process from the approach of O 2 molecules to the surface, through the chemisorption and absorption of O atoms, up to the formation of first Al 2 O 3 formula units. An energetically feasible mechanism for the formation of these Al 2…
Thermostimulated processes in statically and dynamically disordered luminescent solids
1993
Abstract Trap spectra depending on the concentration of defects in crystalline KBr-T1, LiF-Mg, Ti, A1 2 O 3 and glassy Na 2 O·SiO 2 are investigated. The nature of inhomogeneous broadening and continuous distribution of traps over activation energies at sufficiently high defect concentrations is considered. Impurity hopping controlled recombination of electronic excitations is observed. The presence of enlarged values of process activation energies and frequency factors is discussed in terms of the concept of dynamic disorder, taking into account the fluctuational changes in both the perfectpart and the structure of defects in the solid at high temperatures.
Defects in yttrium aluminium perovskite and garnet crystals: atomistic study
2000
Native and impurity point defects in both yttrium aluminium perovskite (YAP) and garnet (YAG) crystals are studied in the framework of the pair-potential approximation coupled with the shell model description of the lattice ions. The calculated formation energies for native defects suggest that the antisite disorder is preferred over the Frenkel and Schottky-like disorder in both YAP and YAG. The calculated values of the distortion caused by the antisite YAl x in the lattice turn out to be in an excellent agreement with the EXAFS measurements. In non-stoichiometric compounds, the calculated reaction energies indicate that excess Y2 O3 or Al2 O3 is most likely to be accommodated by the forma…
Pyroxene-based glass-ceramics as glazes for floor tiles
2005
Abstract Crystallization of a glass with composition in the diopside primary crystallization field in the MgO–CaO–Al 2 O 3 –SiO 2 quaternary system was investigated. Also the action of some additives, nucleants and fluxes, in the pyroxene development was examined. Glasses were prepared by conventional melting of a mixture of raw materials and cooled by pouring in water. Pellets of glass powder specimens were thermally treated at several temperatures up to 1200 °C. The crystallization path was followed by X-ray diffraction powder (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDX). The results proved that, in addition to the effect of B 2 O 3 and TiO 2 in…
A rietveld study of the cation substitution between uvarovite and yttrium-aluminum synthetic garnets, obtained by sol-gel method
1994
A series of synthetic garnets solid solutions with compositions between Y 3 Al 2 Al 3 O 12 (Y-Al garnet) (YAG) and Ca 3 Cr 2 Si 3 O 12 (uvarovite) was synthesized using the sol-gel method. The expected general formula is (Ca x Y 1-x ) 3 (Cr x Al 1-x ) 2 (Si x Al 1-x ) 3 O 12 where x=0 to x=1. The cation distribution in dodecahedral, octahedral and tetrahedral sites and bond distances in these synthetic garnets were determined using the Rietveld method. It shows the incomplete substitution in small sites. The smaller site the smaller substitution there is
Oxidation-driven changes of the in-plane magnetic surface anisotropies of the Fe(110)/Al interface
2003
Abstract Thin epitaxial iron films grown on W(1 1 0) were covered by ultrathin epitaxial aluminium layers of varying thicknesses from 0.2 to 0.6 nm and subsequently naturally oxidized in situ with oxygen exposures up to 150 L. Correlations between the oxidation states of the Al covers and changes of the in-plane magnetic anisotropies at the Fe(1 1 0)/Al interface were discussed on the basis of results from X-ray photoelectron spectroscopy and longitudinal magneto-optical Kerr magnetometry measurements. The Al coverage decreases the second-order in-plane surface anisotropy of the Fe(1 1 0) surface. Whereas for the thinnest Al covers, the second-order in-plane magnetic surface anisotropy decr…
Co-precipitation synthesis of Nd:YAG nano-powders: the effect of Nd dopant addition with thermal treatment
2007
Nanopowders of Yttrium Aluminium Garnet doped with neodymium ions were obtained by the co-precipitation method from the reaction of aluminium, yttrium and neodymium nitrate with ammonia. The amount of neodymium was selected in order to produce samples of nominal stoichiometry NdXY (3-X)Al5O12 (where X = 0.006, 0.012, 0.024, 0.048, 0.081, 0.096, 0.17, 0.19, 0.38, 0.54, and 0.72, respectively). After washing and drying, the hydroxide precursors were subjected to Thermo-Gravimetry and Differential Thermal Analysis experiments from room temperature up to 1500 °C, which showed the presence of exothermal events accompanying phase transformation phenomena. X-ray diffraction investigations conducte…
Effect of NiO and/or TiO2 mullite formation and microstructure from gels
1998
Polymeric and colloidal gels with a constant molar ratio of (Al+Ni and/or Ti)/Si=3/1 and various (Al/Ni and/or Ti) ratios (up to 21.42 mol% NiO+TiO2) were prepared and used to study the effect of the precursor chemical homogeneity on mullite formation processes and the resulting microstructure. Both kinds of gel precursors were preheated at 750°C for 3 h in order to obtain appropriate gel-derived glasses for further thermal processing. After annealing for several time periods at temperatures between 750 and 1500°C, differences in crystallization pathways were observed. Polymeric gels crystallized Al–Si and NiAl2O4 spinels from the amorphous form at temperatures in the range between 900 and …
Synthesis and characterisation of pack cemented aluminide coatings on metals
2004
Abstract The exposition of metallic materials to high temperature environments leads to their corrosion because of oxidation or sulphidation. One way to protect such materials is to produce an Al 2 O 3 layer which needs to be continuous enough to limit diffusion of oxygen or metallic elements, and withstand this corrosion. Since a few years, it has been proved that aluminide compounds are one of the most effective materials to achieve this goal. Indeed, they possess sufficient Al and many beneficial mechanical properties when exposed to high temperature conditions to make possible the formation of a protective Al 2 O 3 scale. This study is aimed at the elaboration of iron, nickel and molybd…